TM 9-2320-279-34-1
Electrical System Maintenance Instructions (Cont)
6-14. ENGINE WIRING HARNESS REMOVAL/INSTALLATION (CONT).
(15)
Disconnect two wires (32) from buffer
switch (33) by pulling wires off switch
terminals.
(16)
Remove two nuts (34) and disconnect
two wires (35) from engine shutdown
solenoid (36). Return nuts to shutdown
solenoid terminals (37).
(17)
Remove nut (38) and washer (39). Disconnect wires (40 and 41) from starter solenoid
terminal (42).
(18)
Remove nut (43), washer (44), and wire (45) from starter solenoid terminal (46).
(19)
Remove nut (47) and lockwasher (48). Disconnect harness wires (49 and 51) and wire (52) from
starter terminal (53).
6-92
Change 3
