TM 9-2320-279-34-1
Electrical System Maintenance Instructions (Cont)
(5)
(6)
Remove tape, as necessary, to connect harness ends to component or connector.
Pull harness all the way to the left and connect lead (5) to water temperature sending unit (6)
with washer (7) lockwasher (8) and nut (9).
Connect lead (10) to high water temperature switch (11) with washer (12), lockwasher (13), and
nut (14).
(7) Connect wire (15) to alternator regulator (16) and wires (17 and 18) to terminals of
alternator (19). Secure each wire with washer (20) and nut (21).
6-97
