TM 9-2320-279-34-1
6-14.12
Change 5
Electrical System Maintenance Instructions (Cont)
6-2.1. 24-VOLT ALTERNATOR REPAIR (CONT).
(19)
Install stator ring terminals (39) on slip
ring end housing (6) and regulator studs
(36) with three nuts (40).
(20)
Aline screw holes on slip ring end
housing (6), stator (41), and drive end
housing (1).
(21)
Install slip ring end housing (6) on drive
end housing (1) with three screws (42),
washers (43), and locknuts (44).
(22)
Install capacitor (45) on slip ring end
housing (6) with two screws (46),
lockwashers (47), screws (48),
lockwashers (49), and spacers (50).
