TM 9-2320-279-20-3
Change 6
18-20.5
Body Accessory Maintenance Instructions (Cont)
NOTE
Conlinks are disconnected from idler shafts
by prying off.
(3)
Disconnect two conlinks (9)
from idler shafts (10).
(4)
Remove splined drive cone
(11), rubber boot (12), nut (13),
washer (14), and seal washer
(15) from idler shaft (16).
NOTE
When screws are removed, idler shaft will
drop to floor of cab.
(5)
Remove two screws (17) and idler
shaft (16) from cab shell (18).
