TM 5-5420-234-14&P
5-22. DIVERTER MANIFOLD REPAIR (continued).
(2) Position diverter manifold (1) on tubes (13 and 14).
(3) Loosely install two coupling nuts (11) on adapters (12). Do not tighten.
(4) Install diverter manifold (1) on bracket (10) using three washers (9), new lockwashers (8) and screws (7).
(5) Tighten two coupling nuts (11).
9
12
13
10
11
8
7
7
8
1
14
(6) Install four hoses (5, 4, 3, and 2) on four adapters (6).
3
4
2
1
5
6
f.
Follow-on Maintenance:
6
Fill hydraulic reservoir (LO 9-2320-279-12).
Start engine and run for 3 minutes (TM 9-2320-279-10).
Turn engine off (TM 9-2320-279-10).
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
