TM 5-5420-234-14&P
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Tag, Identification (as required) (Item 23,
Pan, Drain, 4 Gallon (MIL-P-45189)
Tool Kit, General Mechanic's: Automotive
Lockwasher (3) (Item 118, Appendix K)
(SC 5180-90-N26)
O-ring (2) (Item 72, Appendix K)
Wrench, Combination, 1 3/4 in. (1256)
O-ring (2) (Item 99, Appendix K)
Wrench, Open-end, 1 5/8 & 1 13/16 in.
O-ring (4) (Item 81, Appendix K)
(ANSI B107.6)
Equipment Condition
Materials/Parts
Wheels chocked (TM 9-2320-279-10)
Cable Ties (Item 8, Appendix E)
Lubricating Oil (Item 20, Appendix E)
a. Removal.
NOTE
Cut cable ties as required.
Tag and mark hoses prior to removal.
Cap and plug hoses after removal.
(1) Position drain pan under diverter manifold (1).
(2) Remove four hoses (2, 3, 4, and 5) from four adapters (6).
3
4
2
1
5
6
6
