TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic's: Automotive
Two
(SC 5180-90-N26)
Equipment Condition
Materials/Parts
BAP unloaded to ground (para 2-10)
Cotter pin (2) (Item 16, Appendix K)
Wheels chocked (TM 9-2320-279-10)
Cotter pin (Item 90, Appendix K)
Engine turned off (TM 9-2320-279-10)
Locknut (Item 1, Appendix K)
Locknut (Item 67, Appendix K)
a. Removal.
NOTE
Front bap locks are located on right and left sides of vehicle. Both bap
locks are replaced the same way. Right side shown.
Model B trucks are equipped with shims between bap lock and frame
(1) Remove two screws (1) and plate (2) from bracket (3).
(2) Remove cotter pin (4), pin (5) and bracket (6) from lock (7). Discard cotter pin.
7
3
5
6
4
2
1
Change 1
