TM 5-5420-234-14&P
4-86. MAIN LHS HARNESS REPLACEMENT (MODEL A ONLY) (continued).
(3) Remove main LHS harness (4) from grommet
4
5
(5) on compression frame bracket (6).
NOTE
Note location of cable ties prior to
removal to ensure proper installation.
(4) Cut and remove cable ties securing main LHS
harness (4) to hydraulic tube (7).
6
8
10
10
7
8
4
9
(5) Disconnect connector P7 (8) from main frame junction box (9).
(6) Remove main LHS harness (4) from vehicle (10).
b. Installation.
(1) Route main LHS harness (4) on vehicle (10).
(2) Connect connector P7 (8) to main frame junction box (9).
NOTE
Install cable ties in same locations as noted during removal.
(3) Secure main LHS harness (4) to hydraulic tube (7) with plastic cable ties.
(4) Install main LHS harness (4) in grommet (5) on compression frame bracket (6).
4-6641
4- 41
Change 1
