TM 5-5420-234-14&P
4-80. LEFT- HAND LINKING HARNESS REPLACEMENT (MODEL A ONLY) (continued).
b. Installation.
(1) Install nut (34), plastic insert (35), and rubber grommet (36) on left-hand linking harness (37).
NOTE
Install cable ties as required.
(2) Position left-hand linking harness (37) on vehicle (39) and route up to junction box (38).
NOTE
Ensure rubber grommet is installed in same position as noted during removal.
(3) Install left-hand linking harness (37) in junction box (38) with rubber grommet (36), plastic insert (35),
and nut (34).
(4) Install brown/black wire no. 27K (32) on terminal no. 27 (33) and yellow/black wire no. 23J (30) on
terminal no. 23 (31).
(5) Install red wire no. 4B (28) on terminal no. 4 (29) and black wire no. 8A (26) on terminal no. 8 (27).
(6) Install orange/black wire no. 31I (24) on terminal no. 31 (25) and blue/black wire no. 30H (22) on
terminal no. 30 (23).
34
(7) Install red/black wire no. 13G (20) on terminal no. 13 (21)
36 35
and brown wire no. 17F (18) on terminal no. 17 (19).
37
(8) Install yellow wire no. 35E (16) on terminal no. 35 (17) and
orange wire no. 33D (14) on terminal no. 33 (15).
38
(9) Install blue wire no. 7C (12) on terminal no. 7 (13) and
39
brown/black wire no. 9L (10) on terminal no. 9 (11).
26 10
12
20
18
22
32
28
24
30
14
16
19
29
13
17
27
11
21
31
33 23 25 15
OTHER WIRE HARNESSES
REMOVED FOR CLARITY
446621
-- 21
Change 1
