TM 5-5420-234-14&P
4-69. CAB TO JUNCTION BOX LINKING HARNESS (24-PIN) REPLACEMENT
(MODEL A ONLY) (continued).
(3) Remove grommet (4) from cab (5).
(4) Follow 24-pin cab to junction box harness (6) down through cab (5) and remove cable ties as required.
(5) Remove 24-pin cab to junction box harness (6) from vehicle (7).
7
4
6
~
5
b. Installation.
NOTE
24-pin linking harness is routed the same as the 9-pin linking harness.
Install cable ties in same locations as noted during removal.
(1) Route 24-pin cab to junction harness (6) up through vehicle (7) and cab (5).
(2) Install grommet (4) in cab (5).
4-592
8
Change 1
