TM 5-5420-234-14&P
4-68. SUPPLY HARNESS REPLACEMENT (MODEL A ONLY) (continued).
CAUTION
Remove only the wires for the supply harness. All other wires must remain in
position. Failure to comply may cause damage to equipment.
(3) Remove three nuts (6), lockwashers (7) and wire no. 2
(8) from CB
no. 1
(9), wire no. 4 (10)
from CB
no.
6 (11) and wire no. 1 (12) from CB no. 9 (13). Discard lockwashers.
(4) Reinstall three nuts (6) on CB no. 1 (9) , no. 6 (11) and no. 9 (13).
(5) Remove
screw (14)
and wire no. 3 (15)
from relay mounting bracket (16).
(6) Reinstall screw (14) in
relay mounting bracket (16).
6
10
7
12
6
7
11
14
15
6
16
7
8
9
13
4--587
Change 1
4 577