TM 5-5420-234-14&P
4-68. SUPPLY HARNESS REPLACEMENT (MODEL A ONLY) (continued).
CAUTION
Move side panel outward only enough to gain access to wires. Failure to comply may
result in damage to equipment.
(7) Remove screw (17) adn wire no. 6 (18) from high idle switch (19).
(8) Reinstall screw (17) in high idle switch (19).
(9) Remove eight screws (20) and pull side panel (21)
outward.
(10) Remove screw (22), wire no. 7 (23) and wire no. 8
(24) from work light switch (25).
(11) Reinstall screw (22) on work light switch (25).
19
(12) Remove supply harness (5) from cab (4).
18
17
20
21
5
23
~
24
4
25
22
b. Installation.
NOTE
Install cable ties in same positions as noted during removal.
(1) Position supply harness (5) in cab (4).
588
7
4-578
Change 1
