TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c.
Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's:
Cab control box removed (para 4-71)
Automotive (SC 5180-90-N26)
Heater compartment cover removed
(TM 9-2320-279-20)
Materials/Parts
Engine stop switch removed (TM 9-2320-279-20)
Cable Ties (Item 8, Appendix E)
Tag, Identification (as required) (Item 23, Appendix E)
Lockwasher (3) (Item 94, Appendix K)
a. Removal.
NOTE
Tag and mark all connectors, wires and connection points prior to removal to
ensure proper installation.
Cut cable ties as required.
Note location of cable ties prior to removal to ensure proper installation.
(1) Remove two screws (1), washers (2) and cushion clips (3) from cab (4).
(2) Remove supply harness (5) from two cushion clips (3).
1
2
3
5
3
~
4
Change 1
