TM 5-5420-234-14&P
This task covers:
a. Type 1 Data Plate Removal
c.
Type 2 Data Plate Removal
e.
Follow-on Maintenance
b. Type 1 Data Plate Installation
d.
Type 2 Data Plate Installation
INITIAL SETUP
Tools and Special Tools:
Equipment Condition:
Drill, Electric, Portable (W-D-661)
Engine turned off (TM 9-2320-279-10)
Drill Set, Twist (800434)
Wheels chocked (TM 9-2320-279-10)
Tool Kit, Blind Rivet (D-100-MIL-1)
Tool Kit, General Mechanic's: Automotive
(SC 5180-90-N26)
NOTE
There are two types of data plates used, type 1 and type 2. Type 1 is shown
in subparagraph a, and type 2 is shown in subparagraph c.
a. Type 1 Data Plate Removal.
Drill out four rivets (1) and remove data plate (2) from frame (3). Discard rivets.
1
3
2
b. Type 1 Data Plate Installation.
Install data plate (2) on frame (3) with four rivets (1).
