TM 5-5420-234-14&P
4-50. REMOTE CONTROL STOWAGE BOX REPLACEMENT (continued).
(9) Remove two screws (14), lockwashers (15), washers (16), and plate (17) from remote control stowage box
(2). Discard lockwashers.
(10) Remove locknut (18), screw (19), and latch (20) from latch bracket (21). Discard locknut.
(11) Remove locknut (22), screw (23), and latch bracket (21) from remote control stowage box (2). Discard
locknut.
(12) Remove screw (24), locknut (25),
and bracket (26) from remote control
stowage box (2). Discard locknut.
(13) Remove screw (27), c washer (28),
locknut (29), and marker light (30)
from bracket (26). Discard locknut.
24
2
b. Installation.
29
25
(1) Install marker light (30), screw (27),
28
c washer (28), and new locknut (29)
on bracket (26).
26
30
(2) Install bracket (26), screw (24), and
27
new locknut (25) on remote control
stowage box (2).
(3) Install latch bracket (21) on remote
control stowage box (2) with screw
(23) and new locknut (22).
(4) Install latch (20) in latch bracket (21) with screw (19) and new locknut (18).
(5) Install plate (17) in remote control stowage box (2) with two washers (16), new lockwashers (15), and
screws (14).
(6) Install remote control stowage box door (7) on remote control stowage box (2) with three screws (12) and
new lockwashers (13). Do not tighten.
(7) With the help of an assistant, install remote control stowage box (2) on tool stowage box (6) with four
screws (11) and new locknuts (10). Do not tighten.
(8) Lift remote control stowage box door (7) and install two screws (9) and new locknuts (8) in remote control
stowage box (2) and inside of tool stowage box (6). Do not tighten.
(9) Lower remote control stowage box door (7).
(10) Install three new lockwashers (5) and screws (4) thru tool stowage box (6) and into remote control stowage
box door (7).
(11) Tighten four screws (11), three screws (12), and two screws (9).
4-529
