TM 5-5420-234-14&P
This task covers:
a. Removal
c. Installation
b. Cleaning and Inspection
d. Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Lockwasher (Item 32, Appendix K)
Tool Kit, General Mechanic's: Automotive
Spring Pin (4) (Item 6, Appendix K)
(SC 5180-90-N26)
Equipment Condition
Materials/Parts
Center roller hydraulic cylinders and hoses
Drycleaning Solvent (Item 13, Appendix E)
removed (para 4-41)
Rag (Item 19, Appendix E)
a. Removal.
(1) Remove screw (1), lockwasher (2), straight-headed pin (3), center roller assembly (4), and two thrust
washers (5) from center roller carriage (6). Discard lockwasher.
(2) Remove two spring pins (7) from two front strap pins (8). Remove two strap pins (8) and pull straps (9)
from center roller carriage (6). Remove center roller carriage (6) from the BAP. Discard spring pins.
(3) Remove two spring pins (10) from two rear strap pins (11). Remove two strap pins (11) and pull straps
(9) from rear cylinder carriage (12). Remove rear cylinder carriage (12) from the BAP. Discard spring
pins.
11
10
12
9
7
8
10
6
9
5
2
7
1
4
3
5
