TM 5-5420-234-14&P
Section IV. OPERATION UNDER UNUSUAL CONDITIONS
This section addresses operating procedures under unusual conditions.
For operation of the Heavy Expanded Mobility Tactical Truck (HEMTT) in unusual environment/weather conditions,
see TM 9-2320-279-10; for the bridge erection boat, see TM 5-1940-277-10.
NOTE
The following manual mode operations using the cab control box are to be
performed only when the normal AUTO mode electric circuit is malfunctioning.
a. Secure winch frame to
the BAP. Make sure two winch frame locking levers (1) are in
the up
position. If
locking levers (1) are not up:
(1)
Remove lockpin (2) from each locking lever (1).
2
(2)
Swing locking lever (1) to the up position.
1
(3)
Insert lockpin (2) into locking lever (1).
b.
If the BAP is loaded, inspect load and make sure it is secure.