TM 5-5420-234-14&P
2-21. NORMAL REMOVAL OF THE BAP FROM TRAILER (continued).
x. Place transmission in forward mode and move Transporter 10 feet (3 m) from trailer.
y.
Apply parking brake and place transmission in neutral.
NOTE
If BAP hold-down locks do not engage, raise the BAP slightly and lower again. The
BAP should seat completely and engage BAP hold-down locks.
z.
Position PTO ENGAGE switch (12) to OFF, and turn LHS MODE SELECT switch (11) to OFF.
19
11
14
PTO ENGAGE
12
OFF
ON
aa. Stow curb-side and road-side transload rollers
(20):
(1)
Remove lockpin (21) from stowed position
on transload rollers (20).
24
(2)
While holding transload roller (20), swing
retainer bar (22) free of notch (23) on
transload rollers (20).
(3)
Swing transload roller (20) into stowed
20
position and install lockpin (21) in transload
rollers (20).
21
(4)
Swing transload bracket (24) up against
23
lockpin (21).
22
2-125
