TM 5-5420-234-14&P
2-21. NORMAL REMOVAL OF THE BAP FROM TRAILER (continued).
(5)
Move hand pump selector valve lever (9) to center roller UP position, to allow extension cylinders to
retract fully.
9
9
(6)
When extension cylinders are retracted, return selector valve (9) to center position (off).
See TM 9-2320-279-10 in regard to labels--decals, data plates, and instruction plates--on the HEMTT family of
vehicles. For the CBT, operational instruction plates are located on each lock and roller assembly. In addition, the
following are located in the areas indicated:
b. "Heavy Lift Warning." This decal, located in the curb-side BAP toolbox, warns of "Heavy Lift" in reference
to the winch frame extension assembly and snatch block stowed in the stowage box.
c.
Hearing Protection Warning. There are two of these decals, one on the battery box cover and one on the air
cleaner, warning of "High Intensity Noise -- Hearing Protection Required."
d. "LHS Function Warning." This decal, located on the driver's side of the cab control box, warns of not using
the LHS for any function other than lifting palletized loads and bridge equipment.
e. "Stowage Location." This decal, located in the curb-side BAP toolbox, identifies the locations and the items
that are stowed in the toolbox.
f.
"Control Valve Layout." This placard, located inside the hydraulic manifold enclosure, provides the locations
and operations of each hydraulic solenoid and valve.
g. "BAP Transport by PLS Truck." This data plate, located on the front side of the BAP toolbox, provides
instruction on the use of PLS feet.
h. "Bridge Adapter Pallet." This data plate, located on the road side of the BAP A-frame, provides descriptive
data pertaining to the BAP.
