TM 5-5420-234-14&P
2-21. NORMAL REMOVAL OF THE BAP FROM TRAILER (continued).
j.
Move hand pump selector valve lever (9) to transload roller DOWN position.
k. Operate hand pump (10) until all four extension cylinders are fully extended. Rear of the BAP should be
raised about 4 inches (10 cm).
26
27
4 inches
(10 cm)
9
10
9
WARNING
Prior to and during any load or unload cycle, all personnel should stay clear of
the LHS and the BAP or serious injury or death to personnel could result.
Trailer wheels must be chocked during transfer operations or serious injury or
death to personnel could result.
CAUTION
When selecting PTO ENGAGE switch, engine must be at low idle speed. Se-
lection of PTO ENGAGE switch with HIGH IDLE switch on may result in
sudden application of hydraulic pressure to LHS resulting in equipment
damage.
PTO ENGAGE switch must be turned off before road transport or severe
equipment damage could result.
l.
Turn LHS MODE SELECT switch (11) to AUTO, and position PTO ENGAGE switch (12) to ON.
11
12
PTO ENGAGE
OFF
ON
2-122
