TM 5-5420-234-14&P
NOTE
With a 20 percent slope, interior bay requires a water depth of at least 42 inches
(1.07 m). Ramp bay requires a water depth of at least 50 inches (1.27 m).
In case of emergency while the remote control unit is in use, push the
emergency stop switch to shut down operation of the LHS.
The BAP must be loaded on Transporter before retrieval of bridge bays.
a. Secure the BAP to the LHS. Make sure curb-side and
road-side BAP hold-down lock handles (1) are pushed in.
b.
Secure winch frame to LHS hook arm. Make sure
1
two winch frame locking levers (2) are in the down
position. If locking levers (2) are not down:
(1)
Remove lockpin (3) from each locking lever
(2).
(2)
Swing locking lever (2) to the down position.
(3)
Insert lockpin (3) into locking lever (2).
c.
Connect two winch hydraulic pressure hoses (4) to
male connector and female connector (5) on bottom of
hook arm assembly.
4
2
4
5
3
5
