TM 5-5420-234-14&P
2-16. HIGH-BANK BRIDGE BAY LAUNCH (continued).
WARNING
Always wear leather gloves when handling winch cable. Handling winch cable with
25
bare hands could result in injury to personnel.
23
(58) While assistant maintains tension on winch
cable, release WINCH switch (19) when hook holder
(23) is in saddle (25).
(59) Position MAIN FRAME switch (18) to LOAD and
release when main frame is fully stowed.
(60) Position HOOK ARM switch (16) to LOAD and
release when hook arm is fully stowed.
14
(61) Position PTO ENGAGE switch (10) to OFF.
12
PTO ENGAGE
13
10
11
OFF
ON
(62) Disconnect and stow remote control unit (11):
6
(a)
Disconnect cable (13) from LHS receptacle
(14).
(b)
Coil and stow cable (13) in rear of stowage box
(12).
(c)
Stow remote control unit (11) in stowage box
(12).
(63) Secure curb-side and road-side rear guides (6):
(a)
Rotate latch pin (7) until rear guide (6)
disengages.
8
(b)
Swing rear guide (6) to full inboard position
and make sure latch pin (7) clicks in hole (8).
7
2-93
