TM 5-5420-234-14&P
2-12. UNLOADING BRIDGE BAY TO THE GROUND (continued).
v.
While assistant maintains tension on winch cable, position WINCH switch (14) to IN. Release when hook
holder (26) is in saddle (27).
27
26
24
14
22
25
w. Position HIGH IDLE switch (24) to ON. Position MAIN FRAME switch (25) to LOAD.
x. As main frame moves to stowed position, turn HIGH IDLE switch to OFF.
WARNING
When NO TRANSIT WHEN LIT indicator is illuminated, Transporter may be
maneuvered in the immediate vicinity of the loading/unloading site. However,
Transporter is unsafe for road travel. Open-road driving when NO TRANSIT
WHEN LIT indicator is illuminated could result in death or injury to personnel
or damage to equipment.
y.
Position HOOK ARM switch (22) to LOAD until LHS hook arm has been fully stowed.
CAUTION
While maneuvering Transporter in the imme-
diate vicinity of the loading or unloading site,
PTO ENGAGE
LHS MODE SELECT switch may be in any
setting. However, LHS MODE SELECT switch
must be set to OFF/TRANSPORT prior to
11
road travel, to prevent damage to main frame
and hook arm cylinders.
z.
Turn PTO ENGAGE switch (11) to OFF.
OFF
ON
2-61
