TM 5-5420-234-14&P
2-14. CONTROLLED BRIDGE BAY LAUNCH (continued).
d. Connect two winch pressure lines (4) to male connector and female connector (5) located on bottom of hook
arm assembly.
4
4
5
5
CAUTION
When selecting PTO ENGAGE switch, engine must be at low idle speed. Se-
lection of PTO ENGAGE switch with HIGH IDLE switch on may result in
sudden application of hydraulic pressure to the LHS, resulting in damage to
equipment.
PTO ENGAGE switch must be turned off before road transport or severe
equipment damage could result.
e.
Position LHS MODE SELECT switch (6) to OFF, and turn PTO ENGAGE switch (7) to ON.
PTO ENGAGE
6
7
OFF
ON
2-66
