TM 9-2320-279-34-3
Special Purpose Kit Installation Instructions (Cont)
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and
use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
Ensure that surface of bracket is clean.
(37)
(38)
(39)
(40)
(41)
(42)
Apply adhesive (Item 5.3, Appendix C) to
rubber (63) and install on bracket (64).
Apply hand pressure until adhesive sets.
Install bracket (64) with screw (65),
plate (66), and nut (67).
Install screw (68) and nut (69).
Apply pipe thread sealing compound to
threads of elbows (70) and (71).
Install elbow (70), valve (72), and elbow (71)
in coolant pump (73).
Apply pipe thread sealing compound to
threads of elbow (74) and install in coolant
pump (73).
Change 3
23-11
