TM 9-2320-279-34-2
Change 3
15-27
Cab and Body Maintenance Instructions (Cont)
a. Disassembly.
NOTE
Matchmark frame, guide arm, and arm
positioner before removal.
(1)
Remove screw (1), washer (2), and
cable guide (3).
(2)
Remove nut (4), lockwasher (5),
lockwasher (6), guide arm (7), and
arm positioner (8).
(3)
Remove reel (9) from frame (10).
NOTE
There are two models of static ground reels. For Model A, do
steps (4) through (6). For Model B, do step (6.1).
(4)
Remove spring (11) from frame (10) and cotter pin (12).
WARNING
Wear safety glasses while removing retaining rings to protect
eyes from injury or blindness.
(5)
Remove cotter pin (12) and retaining ring (13) from
pawl (14).
CAUTION
Needle bearings may fall out when removing bearing.
(6)
Remove pawl (14) and needle bearing (15) from
frame (10).
(6.1) Remove four screws (15.1) and ratchet
locking assembly (15.2) from frame (10).
