TM 9-2320-279-34-2
Suspension Maintenance Instructions (Cont)
(10)
(11)
(12)
(13)
(14)
(15)
I.oosen two nuts (11) and remove
TA476203
two screws (12), nuts (11) and
lockwashers (13).
Soldier A removes four nuts (14)
and washers (15) while Soldier B
holds four screws (16).
Position supports under each end of
equalizer beam (1) to allow
equalizer beam to be lowered.
Lower equalizer beam (1) on
supports.
Remove four screws (16),
washers (17) and saddle cap (18).
Soldier A and Soldier B remove
spring (2).
b. Rear Spring Removal
(M984EI).
WARNING
Make sure vehicle is securely
supported before removing
springs. If vehicle falls, it will
cause
(1)
(2)
(3)
(4)
(5)
serious injury or death.
Raise vehicle with suitable
lifting device until weight is
off springs (l).
Remove two locknuts (2), four
washers (3), and two
screws (4).
Remove grease fitting (5).
Remove pin (6).
Remove locknut (7), screw (8),
and spacer (9).
14-3
