TM 9-2320-279-34-2!
Frame Maintenance Instructions (Cont)
c. Assembly.
(1) Install one grease fitting (1) in each side of plate (2).
(2) Install adjusting wedge (3), spring (4), screw (5), and locknut (6). Tighten
shows out of locknut.
WARNING
Spring and plunger are under tension. Handle carefully to avoid personal injury.
(3) Soldier A and Soldier B install spring (7) and plunger (8).
(4) Install release handle (9) in plate (2).
(5) Install release lever (10) on release handle (9).
(6)
(7)
(8)
(9)
(10)
(11)
(12)
NOTE
Release lever must move freely. Do not overtighten.
Install washer (11) between release lever (10) and plate (2).
Install release lever (10) into slot in plunger (8).
Install washer (12) on screw (13) and insert through release lever (10) into hole in plate (2).
Install nut (14) on screw (13).
Install stationary jaw (15) in center of plate (2).
Install nut (16) on stationary jaw (15).
Soldier A and Soldier B turn plate (2) over.
13-105
