(19)
(20)
(21)
(22)
(23)
(24)
(25)
TM 9-2320-279-34-2;
Frame Maintenance Instructions (Cont)
Install release handle (21) in plate (2)
and apply antiseize compound to
secondary lockpin hole.
[nstall secondary lock (22) on release
handle (21).
Install cotter pin (23) in release
handle (21).
Install secondary lockpin (24) and
cotter pin (25).
Soldier A and Soldier B lay plate (2)
upside down.
Lock hinged jaw (19) with secondary
lock (22).
Compress and install spring (26) in
plate (2).
WARNING
Improper adjustment can cause
improper locking of the mechanism and
result in personal injury.
(26) Soldier A and Soldier B turn plate (2)
right side UP, or on edge as needed, to
make adjustment.
(27)
(28)
(29)
(30)
19
TA189366
Place kingpin (27) of lock tester in open jaw.
Place lever (28) over front of plate (2).
Push down on kingpin (27) and pull lever (28) to lock fifth wheel.
Tighten or loosen screw (5) to provide 0.040-in. (1 mm) clearance between plunger (8) and
hinged jaw (19).
(31) Place bar (29) against fifth wheel cross tie.
While prying toward rear with bar to open hinged
jaw (19), pull release handle (21 ) and remove jaw tester.
d. Follow-on Maintenance. None.
END OF TASK
13-1 07/(1 3-108 blank)
