TM 9-2320-279-34-2
(8)
(9)
(10)
(11)
Steering System Maintenance Instructions (Cont)
Install two long dowel pins (11).
Install preformed packing (12) and ring (13).
NOTE
Vanes are installed with round edge against ring.
Install rotor (14) and 12 vanes (15).
Install preformed packing (16), inlet body (17), and four screws (18). Tighten screws to 75 to
85 lb-ft (102 to 115 N•m) evenly, in 1-2-3-4 order.
Install two short dowel pins (19).
(12)
(13) Install preformed packing (20) and
ring (21).
NOTE
Vanes are installed with round edge
against ring.
(14) Install rotor (22) and 12 vanes (23).
12-48.5
