TM 9-2320-279-34-2
(1)
(2)
Steering System Maintenance Instructions (Cent)
Tag, mark, and disconnect two hoses (1 and 2).
Remove four screws (3), lockwashers (4), two clamp halves (5), hose (6), and preformed
packing (7).
NOTE
Splined coupling between steering/tensioner pump and engine may come off
pump or stay on engine. If it comes off with pump, install on engine.
(3) Remove two screws (8), lockwashers (9), washers (10), and steering/tensioner pump (11).
Gasket may stay on adapter housing.
(4) Remove gasket (12) from steering/tensioner
pump (11).
(5) Remove two fittings (13 and 14) and preformed
packings (15 and 16).
b. Disassembly.
CAUTION
Parts are under spring pressure. Use care when removing cover to prevent loss of parts.
NOTE
Matchmark pump housing before beginning disassembly.
(1) Remove nut (1), gear (2), and key (3) from shaft (4).
(2) Remove four screws (5), cover (6), and preformed packing (7).
(3) Remove spring (8) and pressure plate (9).
12-48.1
