TM 9-2320-279-34-2
Steering System Maintenance Instructions (Cont)
12-7. STEERING PUMP REMOVAL/REPAIR/INSTALLATION (CONT).
NOTE
The rounded edges of vanes
should be installed facing
outward.
(8) Install preformed
packing (12) and two
pins (13) in body (7).
(9) Install 12 vanes (14) in
rotor (15).
(10) Install rotor (15) and
ring (16).
(11) Press bushing (17) into
pressure plate (18).
(12) Aline pressure plate (18)
with pins (13) and install on
ring (16).
(13) Install spring (19).
(14) Install preformed
packing (20) on cover (21).
(15) Install cover (21) with four
(16)
(17)
(18)
screws (22). Tighten screws
to 75 to 85 Ib-ft ( 102 to
115 N•m).
Install retaining ring (23) in cover (21).
NOTE
Nut end of valve points out.
Install valve (24) and spring (25).
Install two plugs (26).
12-46
