TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
10-12. DIFFERENTIAL CARRIER, AXLE NO. 4 (AXLE MODELS 480 AND 580) REPAIR
(CONT).
NOTE
When installing bearing caps, it may be necessary to tap
caps with hammer. Be sure cap is fully seated and threads
alined.
(71) Aline and seat bearing cap (45), two washers (46), and
screws (47) on differential carrier (2). Tighten screws
finger-tight.
(72) Install and seat two bushings (48), bearing
cap (49), two screws (50), and washers (51).
Tighten screws finger-tight.
Threads on bearing adjusters
damaged if bearing adjusters
installed carefully.
may be
are not
(73) Install bearing adjuster (52)
finger-tight.
(74) Install bearing adjuster (53)
finger-tight.
(75) Tighten four screws (47 and 50) to
40 to 50 lb-ft (54 to 68 N·m).
10-82
