TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cent)
10-12. DIFFERENTIAL CARRIER, AXLE NO. 4 (AXLE MODELS 480 AND 580) REPAIR
(CONT).
(96) If tooth contact is like pattern E, move pinion
away from ring gear (9) by adding shims, then
repeat steps (81) through (92).
(97) Tighten four screws (47 and 50) to 370 to 430 lb-ft
(502 to 583 N•m).
Check that both adjuster locks aline with bearing
adjusters.
(98) Install adjuster lock (54) and cotter pin (55) on
bearing cap (45).
(99) Install lockwire on two screws (47).
(100) Install adjuster lock (56) with two
screws (57). Tighten screws to 160 to
176 lb-ft (217 to 239 N•m).
(101) Install lockwire on two screws (57).
(102) Install lockwire on two screws (50).
d. Follow-on
END OF TASK
Maintenance Install differential carrier (para 10-11).
10-86
