TM 9-2320-279-34-1
Axles No. 7 and No. 2 Maintenance Instructions (Cont)
(3) Lubricate oil seal (7) with oil. Install oil seal on shaft (8).
(4) Install yoke (9) with flanged nut (10). Soldier A and Soldier B tighten nut to 840 to 1020 lb-ft
(1139 to 1383 N•m).
(5) Set TRACTION CONTROL lever to OFF position (TM 9-2320-279-10).
d .
Follow-on Maintenance. Install propeller shaft (TM 9-2320-279-20).
END OF TASK
Section III. DIFFERENTIAL CARRIERS
9-7. DIFFERENTIAL CARRIER, AXLE NO. 1 REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
Solvent, dry cleaning, Item 57, Appendix C
Adhesive-sealant, silicone, Item 6, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
References
None
Equipment Condition
TM or Para
Condition Description
Para 9-3
Axle No. 1 removed.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
9-19
