(4)
Install differential carrier (1) on axle housing (3).
NOTE
.
There are two models of axle housings: Model A and Model B. The
differential carrier is mounted on housing A by studs,
lockwashers, and nuts. The differential carrier is mounted on
housing B by a combination of studs, lockwashers, and nuts, and
screws and lockwashers.
.
.
(5)
Do steps (5) and (6) for housing A.
Do steps (5.1), (5.2), and (6) for housing B.
Install three air line brackets (4), 12 lockwashers (5), and nuts (6). Tighten nuts to
180 lb-ft (244 N•m).
NOTE
Ensure 2 1/4 inch and 1 3/4 inch screws are positioned as tagged and marked
during removal.
(5.1)
(5.2)
Install three air line brackets (4), eight lockwashers (5), and screws (6).
Install four lockwashers (6.1) and nuts (6.2) on differential carrier. Tighten nuts to
180 lb-ft (244 N•m).
(6)
Remove lifting device from differential carrier (1).
TM 9-2320-279-34-1
Axles No. 1 and No. 2 Maintenance Instructions (Cont)
d. Follow-on Maintenance.
(1)
Install No. 1 axle (para 9-3).
(2)
Fill axle (LO 9-2320-279-12).
END OF TASK
Change 3
9-21
