TM 9-2320-279-34-1
Axles No. 1 and No. 2 Maintenance Instructions (Cont)
9-5. AXLE HOUSING COVER ASSEMBLY, AXLE NO. 2 REMOVAL/REPAIR/
INSTALLATION (CONT).
e.
Installation.
(1)
Install bearing sleeve (1).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area.
If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
(2)
Apply silicone adhesive-sealant and install cover (2) with four tapered locks (3), 11
lockwashers (4), and nuts (5). Tighten nuts to 70 to 86 lb-ft (95 to 117 N•m).
(3)
Install lockwasher (6) and screw (7). Tighten screw to 40 lb-ft (54 N•m).
f.
Follow-on Maintenance.
(1)
Install yoke and oil seal (para 9-6).
(2)
Fill axle (LO 9-2320-279-12).
END OF TASK
9-16 Change 3
