TM 9-2320-279-34-1
Axles No. 1 and No. 2 Maintenance Instructions (Cont)
NOTE
Tag and mark air lines before disconnecting.
(1)
(2)
(3)
(4)
.
.
(5)
Disconnect two air lines (1 and 2) from
lockout air chamber (3).
Remove three screws (4), washers (5),
nuts (6), lockwashers (7), and clamps (8)
from three brackets (9). Move two
hoses (10 and 11) aside.
Remove fitting (12) from lockout air
chamber (3).
Position suitable lifting device and
secure to axle (13).
NOTE
Do not disconnect frame end of
torque rod.
Some models of vehicles contain
washers between torque rod and axle.
Perform step (5.1) for these models.
Remove two locknuts (14), screws (15),
and four washers (16), and disconnect
axle end of torque rod (17).
(5.1) Remove two locknuts (14), screws (15),
four washers (16), two washers (16.1),
and disconnect axle end of torque
rod (17).
NOTE
Screw on left side can only be removed
with inner beam end adapter.
(6)
Remove two locknuts (18), four
washers (19), two screws (20),
and four beam end adapters (21)
from two equalizer beams (22).
(7)
Soldier A and Soldier B remove
axle (13).
Change 3
9-11
