TM 9-2320-279-34-1
Transfer Case Maintenance Instructions (Cont)
8-14.
LOCKOUT SHIFT CHAMBER REMOVAL/REPAIR/INSTALLATION (CONT).
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid
injury or death, keep away from open fire and
use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(3)
Coat threads of elbow (7) and
connector (8) with pipe thread sealing
compound.
(4) Install elbow (7).
(5)
Install connector (8).
(6)
Connect two airhoses (9 and 10).
f.
Follow-on Maintenance. Start engine, build
END OF TASK
up air pressure, check for leaks (TM 9-2320-279-10).
8-15.
LUBRICATION PUMP REMOVAL/INSTALLATION.
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
Compound, sealing, Item 26, Appendix C
Compound, sealing, pipe thread, Item 28.1,
Appendix C
Adhesive, Item 8, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition
Description
TM 9-2320-279-10 Shut off engine.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
8-52 Change 3
