T r a n s f e r C a s e I n s t r u c t i o n s ( C o n t )
TM 9-2320-279-34-1
(4)
Place ring clamp (9) on rear part of chamber body (7).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
(5)
Coat threads of two screws (10) with sealing compound and install screws, lockwashers (11), and
rear part of chamber body (7).
NOTE
Check that shifter shaft is completely out.
(6)
Soldier A installs copper washer (12), spring (13), and pushes diaphragm assembly (14) towards
chamber body (7) while Soldier B installs copper washer (15) and locknut (16).
e.
Installation.
(1)
Press cover (1) in ring clamp (2) and
install two screws (3) and nuts (4).
(2)
Install preformed packing (5) and
plug (6).
Change 3
8-51
