TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
7-19. SECOND CLUTCH AND CENTER SUPPORT HOUSING
REMOVAL/REPAIR/INSTALLATION (CONT).
(14) Install second clutch piston (1) in bottom of center support housing (2).
Thick steel plates must be
installed on top of stack.
(2)
(3)
(4)
install steel plates (2) with
gap (3) facing as shown.
lnstall 12 clutch plates (1
and 2), starting with
friction plate (1) and
alternating with steel
Plate (2).
install retaining ring (4)
with gap opposite oil pan
side (5) of transmission
housing (6).
e . I n s t a l l a t i o n .
(1) Soak six friction plates (1)
in oil for 2 minutes.
N O T E
f .
Follow-on Maintenance. lnstall third clutch and center support housing (para 7-18).
END OF TASK
7-134
