TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
N O T E
Record and identify check
balls by size and location.
(5) Remove check balls (6, 7, 8,
9, and 10).
(6) Soldier A removes retaining
pin (11) from check valve
pin (12) while Soldier B
presses down on cup
washer (13).
(7) Remove cup washer (13),
spring (14), lubrication
check valve (15) and check
valve pin (12) from oil
transfer plate (3).
W A R N I N G
All valves are under spring
tension. Release springs
slowly to avoid personal
injury.
CAUTION
Do not use magnets to remove
valve bodies. Magnetized
valve bodies may not work
properly.
NOTE
Tag and mark all parts before removing.
Record each notch on adjusting ring that touches retaining pin.
(8) Press adjusting ring (16) inward and remove retaining pin (17) from
modulator valve body (2).
(9) Remove adjusting ring (16), washer (18), spring (19), valve stop (20)
and valve (21) from modulator valve body (2).
7-137
