TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
7-9. TORQUE CONVERTER HOUSING REMOVAL/REPAIR/INSTALLATION (CONT).
(27)
Coat outer seal ring (32) with lubricating oil and install outer seal ring in groove (33) on oil
pump (28).
(28)
Turn torque converter housing (3) on side.
(29)
Aline screw holes in oil pump (28) with holes in torque converter housing (3).
(30)
Soldier A installs oil pump (28) while Soldier B holds torque converter housing (3).
(31)
Soldier A installs six screws (34) through front support (5) while Soldier B holds oil pump (28).
(32)
Tighten six screws (34) to 26 to 32 lb-ft (35 to 43 N•m).
7-64
Change 3
