TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
7-9. TORQUE CONVERTER HOUSING REMOVAL/REPAIR/INSTALLATlON (CONT).
a.
Removal.
(1)
Remove two screws (1) and washers (2)
from inside torque converter
housing (3).
(2)
Remove seven screws (4) and
lockwashers (5) from inside torque
converter housing (3).
NOTE
Two screws and lockwashers were removed
from torque converter housing during
installation of holding fixtures. Seven screws
and lockwashers remain to hold torque
converter housing on transmission housing.
(3)
Remove seven screws (6) and
lockwashers (7) holding torque
converter housing (3) to transmission
housing (8).
(4)
Install two lifting eyes on torque
converter housing (3).
(5)
Install lifting device to lifting eyes.
(6)
Soldier A removes torque
converter housing (3)
while Soldier B operates
lifting device.
(7)
Remove bearing race (9),
roller bearing (10), and
bearing race (11).
(8)
Remove pitot collector (12).
7-56
Change 3
