TM 9-2320-279-34-1
6-14.2
Change 5
Electrical System Maintenance Instructions (Cont)
6-2.1. 24-VOLT ALTERNATOR REPAIR (CONT).
NOTE
Vise is used to securely hold pulley
for step (9).
(8)
Position alternator (14) in vise.
(9)
Remove locknut (16) from shaft (17).
(10)
Remove alternator (14) from vise.
(11)
Remove pulley (18) from shaft (17).
(12)
Remove cooling plate (19), key (20), and
spacer (21) from shaft (17).
(13)
Remove screw (22), lockwasher (23),
and clip (24) from slip ring end housing
(25).
(14)
Remove three nuts (26) and wires (27)
from terminals (28).
(15)
Remove two screws (29), lockwashers
(30), screws (31), lockwashers (32),
spacers (33), and capacitor (34) from
slip ring end housing (25).
