TM 9-2320-279-34-1
Electrical System Maintenance Instructions (Cont)
6-2. ALTERNATOR REPAIR (CONT).
(28)
Install two brushes (51) in brush holder (52).
(29)
Install preformed packing (53) and brush
holder (52).
(30)
Install gasket (54), brush cover (55), four
guard washers (56), lockwashers (57), and
screws (58).
CAUTION
Wires can be shorted out if rubbing on shaft.
(31)
Install preformed packing (59) and cover (60)
with four screws (61).
NOTE
Spacer is installed with notch facing away
from housing.
(32)
Install fan spacer (62) and fan (63) on rotor
shaft (64) with nut (65).
e.
Follow-on Maintenance.
(1)
Test on test stand (TM 9-2920-225-34).
(2)
Install voltage regulator (TM 9-2320-279-20).
(3)
Install alternator and pulley
(TM 9-2320-279-20).
END OF TASK
6-14 Change 3