TM 9-2320-279-34-1
Change 5
6-14.1
Electrical System Maintenance Instructions (Cont)
Supplies
Solvent, drycleaning, Item 57, Appendix C
Compound, insulating, Item 20, Appendix C
Compound, sealing, lubricating, Item 25,
Appendix C
Tags, identification, Item 60, Appendix C
Grease, automotive and artillery, Item 34,
Appendix C
This task covers:
a. Disassembly
d. Assembly
b. Testing
e. Follow-on Maintenance
c. Cleaning/Inspection
INITIAL SETUP
Personnel Required
MOS 63G, Fuel and electrical system repairer
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-20 Alternator removed.
References
None
Special Tools
None
6-2.1. 24V ALTERNATOR REPAIR.
Models
All
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a. Disassembly.
(1)
Remove nut (1) from ignition (IGN) stud
(2) on regulator holder (3).
CAUTION
Voltage regulator is still connected by two
wires. Regulator cannot be removed until
after step (5). Failure to comply may result in
damage to alternator.
(2)
Remove four screws (4) and voltage
regulator (5) from regulator holder (3).
(3)
Remove ignition (IGN) stud (2) and blue
wire (6) from regulator holder (3).
(4)
Remove nut (7), lockwasher (8), and
black wire (9) from negative (--) terminal
of voltage regulator (5).
(5)
Remove nut (10), lockwasher (11), and
red wire (12) from positive (+) terminal
of voltage regulator (5).
(6)
Remove voltage regulator (5) and gasket
(13) from alternator (14).
(7)
Remove two brushes (15) from regulator
holder (3).
