TM 9-2320-279-20-3
Body Accessory Maintenance Instructions (Cont)
18-8.
WINDSHIELD WASHER CONTROL VALVE REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
Para 7-91
Batteries disconnected.
TM 9-2320-279-10 Air system drained.
Compound, sealing, pipe thread, Item 18,
Appendix C
Tag, identification, Item 48, Appendix C
Personnel Required
MOS 638. Heavy wheel vehicle mechanic
Special Environmental Conditions
None
General Safety Instructions
None
NOTE
There are two kinds of washer control valves. Model A is used with the washer reservoir
mounted behind the passenger seat. Model B is used with the washer mounted under the
dash.
If a Model A control valve must be replaced with a Model B control valve, the washer
reservoirs must be changed also. Refer to TM 9-2320-279-24P for proper identification of
parts.
Change 3
18-17
