TM9-2320-279-20-3
Filter-Separator Maintenance Instructions (Cont)
(9) Remove suitable lifting
device from filter-separator
cover lifting eyes (19).
(10) Remove four locknuts (20)
and washers (21) from
evebolts (22).
(11) Install four brackets (23),
washers (21), and
locknuts (20) on
eyebolts (22). Do not
tighten.
(12) Install two screws (24) and
locknuts (25) in four
brackets (23).
(13) Tighten four locknuts (20)
to 75 lb-ft (102 N•m).
(14) Slide two coupling
gaskets (26) on pipe (27)
and position pipe against
pipe (28) and pipe (29).
(15) Position coupling gasket
over ends of pipe (28) and
pipe (29).
(16) Install four coupling
halves (30) on two coupling
gaskets (26) with four
screws (31) and nuts (32).
23-21
