TM 9-2320-279-20-3
Filter-Separator Maintenance Instructions (Cont)
23-4. FILTER-SEPARATOR REMOVAL/REPAIR/INSTALLATION (M978) (MODEL A)
(CONT).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(7)
(8)
(9)
(10)
(11)
(12)
Apply pipe thread sealing compound to
threads of two elbows (10) and install
two elbows in side of filter-separator
tank (6).
Apply pipe thread sealing compound to
threads of six coil inserts (11) and
install in pipes (12).
Install retaining plate (13) on
filter-separator tank (6) with six
screws (14) and washers (15).
Position 10 eyebolts (16), and install
pins (17) through eyebolts and
brackets (18).
Install two retaining rings (19) in each
of 10 pins (17).
Install preformed packing (20) on top
edge of filter-separator tank (6).
CAUTION
Do not tear or otherwise damage
preformed packing during installation of
cover. If packing is damaged, cover will
leak.
(13)
Aline cover (21) on filter-separator
tank (6) so brackets (22) are alined
with brackets (18).
23-18
Change 3
